TOI-3288 b and TOI-4666 b: giant planets round small red dwarfs, weighed with NIRPS

Two gas giants transit cool M dwarfs, and the infrared spectrograph NIRPS weighs them. We check their masses, densities and temperatures with fibub's exoplanet mass and habitable zone tools.

Giant planets are rare round M dwarfs, the small, cool red stars that make up most of the Milky Way. Planet-forming discs round small stars hold less material, so building a Jupiter there is hard, and every new one is a test for formation theories. A new study confirms two such giants, TOI-3288 b and TOI-4666 b, found by the TESS satellite as dips in starlight and weighed with NIRPS, an infrared spectrograph in Chile built for red stars. This article shows how the exoplanet mass calculator and the habitable zone calculator let anyone rebuild the masses, densities and temperatures from the numbers the paper gives.

The paper in brief

Both planets transit: they pass in front of their star, so we know their size from the depth of the dip and that we see the orbit nearly edge-on. Their pull makes the star wobble towards and away from us, and NIRPS and its visible-light partner HARPS measured that wobble.

  • TOI-3288 b orbits a K9 dwarf (3933 K, 0.64 Suns) every 1.43 days. It is a hot Jupiter of about 2.1 Jupiter masses and Jupiter’s size, at about 1,060 K.
  • TOI-4666 b orbits a cooler M2.5 dwarf (3512 K, 0.58 Suns) every 2.91 days. It is a warm Jupiter of about 0.7 Jupiter masses, slightly larger than Jupiter, at about 710 K.

The paper also shows that the infrared NIRPS velocities and the visible HARPS velocities agree, which matters for red stars that are faint in visible light.

Checked with the tools

This is a recomputation: we put the paper’s periods, wobble sizes (semi-amplitudes, K), radii and star properties into the same functions the fibub tools run, and compared the answers with the paper’s own results. Because the planets transit, we took the orbit’s tilt as edge-on (sin i = 1) and the orbits as circular.

Masses. From K = 511 m/s, P = 1.43 days and a star of 0.64 Suns, the mass maths gives 2.108 Jupiter masses for TOI-3288 b (paper 2.11). From K = 144 m/s, 2.91 days and 0.58 Suns it gives 0.704 for TOI-4666 b (paper 0.70). Figure 1 shows the size of the two wobbles: TOI-3288 b swings its star by half a kilometre per second, about 3.5 times more than TOI-4666 b.

How hard each planet pulls its star (simulated)How hard each planet pulls its star (simulated)-500-250025050000.20.40.60.81Orbital phaseStar speed (m/s)TOI-3288 b, K = 511 m/sTOI-4666 b, K = 144 m/sfibub.com
Figure 1. The star's line-of-sight speed over one orbit for each planet, simulated as circular orbits from the paper's semi-amplitudes with the Exoplanet mass calculator's maths. An illustration, not the HARPS or NIRPS measurements.

Why the star’s mass matters. The wobble fixes the planet’s mass only once the star’s mass is known: for the same K and period, the planet’s mass grows as the star’s mass to the power two thirds. Figure 2 runs the tool’s maths for star masses from 0.4 to 0.8 Suns. A 10 % error in the star mass becomes about a 6.5 % error in the planet mass, which is why the paper’s careful star masses (from an empirical relation for M dwarfs) matter as much as the velocities.

Planet mass depends on the star mass you adoptPlanet mass depends on the star mass you adopt0120.40.50.60.70.8Star mass (Suns)Planet mass (Jupiters)TOI-3288 bTOI-4666 bPaperfibub.com
Figure 2. The planet mass the Exoplanet mass calculator gives from each measured K, for star masses from 0.4 to 0.8 Suns. Dots: the paper's masses at its adopted star masses.

Size and density. A planet of 1.00 Jupiter radii in front of a star of 0.67 Suns blocks 2.35 % of the light; TOI-4666 b, 1.11 Jupiter radii in front of 0.59 Suns, blocks 3.74 %, a very deep dip because the star is small. Typing those depths back in returns the radii exactly. The densities come out at 2.61 g/cm³ for TOI-3288 b (twice Jupiter’s 1.33) and 0.64 g/cm³ for TOI-4666 b (close to Saturn’s 0.69).

Orbits and starlight. Kepler’s third law puts the planets at 0.0214 au and 0.0333 au, only 6.9 and 12.1 star radii from their stars. With the paper’s luminosity of 0.060 Suns, TOI-4666 b gets 54.2 times Earth’s sunlight (paper 54).

Temperatures, and a lesson. With no reflected light (albedo 0) and heat spread round the planet, the paper’s SED luminosities give 1,095 K and 755 K, about 40 K warmer than the paper’s 1,059 K and 713 K. If instead the luminosity is worked out from the star’s radius and temperature (0.0968 and 0.0477 Suns), the same maths gives 1,060 K and 713 K, matching the paper. So the paper’s temperatures follow from the star’s radius and temperature, and the small gap is the difference between two honest ways of measuring a star’s brightness. This is exactly the kind of check a referee or a student can run in a minute.

Check Paper Tool result
TOI-3288 b mass 2.11 Jupiter masses 2.108 from K = 511 m/s
TOI-4666 b mass 0.70 Jupiter masses 0.704 from K = 144 m/s
TOI-4666 b starlight 54 times Earth’s 54.2 (L = 0.060 Suns)
TOI-3288 b temperature 1,059 K 1,060 K (L from radius and temperature)
TOI-4666 b temperature 713 K 713 K (L from radius and temperature)
Densities (from the paper’s mass and radius) 2.61 and 0.64 g/cm³

How we made the graphs

Both charts and every number above come from scripts/blog-figures/toi-3288b-toi-4666b-gas-giants-m-dwarfs-nirps.mjs. It calls:

All inputs (periods, K, radii, star masses, radii, temperatures and luminosities) are from the paper. Edge-on, circular orbits and albedo 0 are our assumptions. Figure 1 is simulated from K alone, not the measured velocities.

How we test the maths

Every change to fibub runs tests/sci.mjs, which pins these functions to known answers:

  • Jupiter’s pull on the Sun must come out at 12.47 m/s, and 51 Pegasi b’s minimum mass at 0.477 Jupiter masses from its measured 55.94 m/s wobble (Mayor and Queloz 1995), with its orbit at 0.0530 au.
  • A 1.05 % transit depth on a Sun-sized star must give 1.0 Jupiter radii, and Jupiter’s density must be 1,326 kg/m³.
  • Earth’s equilibrium temperature with albedo 0.306 must be 254 K, and a star of the Sun’s radius and 5,772 K must have exactly 1 solar luminosity.

Check it yourself

The mass, on the exoplanet mass calculator:

  1. Under Work out, keep Mass from the wobble.
  2. Type Star mass (Suns) 0.64, Orbital period (days) 1.43, Eccentricity 0 and Velocity semi-amplitude K (m/s) 511. Leave Inclination empty.
  3. The answer reads a true mass of at least 2.11 Jupiter masses (about 670 Earths).
  4. Now type Transit depth (%) 2.35 and Star radius (Suns) 0.67. You should see a Planet radius of 1.00 Jupiter radii and a Density of about 2.6 g/cm³.
  5. Change the star mass to 0.58, the period to 2.91, K to 144, the depth to 3.74 and the star radius to 0.59 for TOI-4666 b: 0.704 Jupiter masses and about 0.64 g/cm³.

The temperature, on the habitable zone calculator:

  1. Under Star, type Temperature (K) 3512, Luminosity (Suns) 0.0477 and Mass (Suns) 0.58.
  2. Under Planet, type 2.91 in or orbital period (days) and Albedo (0 to 1) 0; keep Heat spread on Round the whole planet.
  3. The Equilibrium temperature reads 713 K. Change the luminosity to 0.060 and it reads 755 K, with Starlight at the planet about 54.2 times Earth’s.

What researchers can use it for

  • Sanity-checking a table before submission or review: the exoplanet mass calculator turns K, period and star mass into a mass in seconds, so a typo in a table shows up at once.
  • Seeing how star parameters carry into planet parameters: change the star mass or radius and watch the planet’s mass, radius and density move, as in Figure 2.
  • Comparing temperature conventions: the habitable zone calculator shows how much an equilibrium temperature depends on the luminosity, albedo and heat-spread choices behind it.
  • Planning follow-up: a 3.7 % transit depth and a 144 m/s wobble are easy targets for small telescopes and mid-size spectrographs; the transit planner finds when the next transits are visible.
  • Teaching: two real planets show students why a hot Jupiter round a small star gives a deep transit and a large wobble.

Sources

  • Frensch, Y. G. C., Bouchy, F., Lo Curto, G., L'Heureux, A., de Lima Gomes, R. et al. (2026), TOI-3288 b and TOI-4666 b: Two gas giants transiting low-mass stars characterised by NIRPS, Astronomy & Astrophysics 707, A73, doi:10.1051/0004-6361/202557656. Licence CC BY 4.0, checked on the journal page, 2026-11-16. Values used here: periods 1.43 and 2.91 days; joint semi-amplitudes 511 and 144 m/s; planet radii 1.00 and 1.11 Jupiter radii; masses 2.11 and 0.70 Jupiter masses; equilibrium temperatures 1059 and 713 K; insolation of TOI-4666 b 54 times Earth's; star temperatures 3933 and 3512 K; star masses 0.64 and 0.58 Suns (from the Mann et al. 2019 relation); star radii 0.67 and 0.59 Suns (Mann et al. 2015); SED luminosities 0.110 and 0.060 Suns; distances 201.3 and 154.1 pc.
  • Equilibrium temperature and Kepler's third law: the formulas used by the Habitable zone calculator (src/lib/sci/habitable.ts).
  • Radial velocity mass function: standard two-body result, as used by the Exoplanet mass calculator (src/lib/sci/rvmass.ts); test value for 51 Pegasi b from Mayor and Queloz (1995), Nature 378, 355.

If you are an author or publisher and want a credit or a passage changed or removed, tell us and we will act quickly.

Tools in this article

Read next