1RM prediction equations: accuracy before and after 16 weeks of resistance training

A study of 119 young adults tested nine one-rep max formulas against real 1RM tests in the bench press, squat and arm curl. We put the formulas side by side with fibub's One-rep max calculator.

Testing a true one-rep max (1RM), the heaviest weight you can lift once, is tiring and carries some risk, so coaches often estimate it instead: lift a lighter weight as many times as you can, then put the weight and the reps into a formula. There are many such formulas, named after the people who wrote them: Epley, Brzycki, Lombardi and others. A study from Brazil asked which ones actually work, for which lifts, for men and for women, and whether they still work after months of training. This article lines the formulas up with the one-rep max calculator, which shows seven of them side by side.

The paper in brief

The team tested 119 young adults (62 women and 57 men, around 22 years old) who were new to structured training. Each did a real 1RM test in three lifts: the bench press, the squat and the arm curl. Each also did one set at 80 % of their 1RM until they could not do another rep, which came to about 10 reps. The weight and reps from that set went into nine formulas, and the estimates were compared with the real 1RM. Everyone then trained for 16 weeks under supervision, and the whole test was repeated.

The findings, in short:

  • Men: the Lombardi formula matched the real 1RM in the bench press and the squat, both before and after training. No formula matched in the arm curl.
  • Women: the Brown, Brzycki and Lander formulas matched in the bench press and the squat; Mayhew, Wathen and Welday matched in the arm curl.
  • Getting stronger did not spoil the formulas that worked: the good ones stayed good after 16 weeks.

The message: no one formula suits every lift and every person, so it helps to see several at once.

Checked with the tools

We did not have the study’s per-person data, so we did not redo its statistics. What we recomputed is what the formulas themselves say, using the exact functions in fibub’s One-rep max calculator. Seven of the paper’s nine formulas are in the tool (Brzycki, Lander, Lombardi, Mayhew, O’Connor, Wathan, which the paper spells Wathen, plus Epley, which the paper did not test); Adams, Brown and Welday are not.

Step 1: what each formula adds. Every formula turns “this load for this many reps” into “the 1RM is this many percent of the load”. Figure 1 draws that for 1 to 15 reps. For 2 or 3 reps they agree within a few percent. By 10 reps they spread from 125 % (O’Connor) to 135 % (Wathan).

What each formula adds on top of the weight you liftedWhat each formula adds on top of the weight you lifted1001201401602.557.51012.515Reps done to near failureEstimated 1RM (% of load)80 % loadEpleyBrzyckiLombardiO'ConnorWathanMayhewLanderfibub.com
Figure 1. The seven formulas in the One-rep max calculator, each turned into "estimated 1RM as a share of the load". The dashed line is 125 %, the answer if the load really was 80 % of the 1RM. Recomputed from the formulas; no paper data.

Step 2: the paper’s test set. If a load really is 80 % of your 1RM, the right answer is 1 ÷ 0.8 = 125 % of the load (the dashed line). At 10 reps, Lombardi gives 125.9 % and O’Connor 125 %, right on it; Epley and Brzycki give 133.3 %, Lander 134.1 %, Wathan 134.7 % and Mayhew 130.9 %. That fits the paper’s finding that Lombardi matched for the men’s bench press and squat. Turned round, the formulas expect someone at 80 % to manage between 7.3 reps (Wathan) and 10 reps (O’Connor): Epley 7.5, Mayhew 7.5, Lander 8.0, Brzycki 8.2, Lombardi 9.3. People who can do more reps at 80 % than a formula expects will be over-estimated by it.

Step 3: one made-up lifter. Figure 2 takes our own example, 60 kg for 10 reps, through the tool. The estimates run from 75.0 kg (O’Connor) and 75.5 kg (Lombardi) to 80.0 kg (Epley, Brzycki), 80.4 kg (Lander) and 80.8 kg (Wathan). If 10 reps really were 80 %, the true 1RM would be 75 kg, so the spread between formulas, about 6 kg, is as big as the training gain many beginners make in a month.

One set of 60 kg for 10 reps, seven estimatesOne set of 60 kg for 10 reps, seven estimates7072.57577.580EpleyBrzyckiLombardiO'Con.WathanMayhewLanderFormulaEstimated 1RM (kg)75 kg if 10 reps = 80 %fibub.com
Figure 2. A made-up lifter: 60 kg for 10 reps, through each formula. The dashed line is 75 kg, what the paper's 80 % set implies. An illustration, not the study's measurements.
Check Paper Our tool result
Lombardi suits a set of about 10 reps at 80 % (men, bench and squat) matched the real 1RM 125.9 % of the load at 10 reps, against 125 % expected
Brzycki and Lander suit women’s bench and squat matched the real 1RM 133.3 % and 134.1 % at 10 reps, so these women likely did fewer than 10 reps
Formulas disagree more as reps rise implied by the lift-by-lift results spread 106 to 114 % at 3 reps, 125 to 135 % at 10
One formula for everyone no seven estimates from 75.0 to 80.8 kg for the same set

How we made the graphs

The charts and every number above come from scripts/blog-figures/one-rep-max-prediction-equations-accuracy-before-after-training.mjs in fibub’s public code. It calls FORMULAS (the functions epley, brzycki, lombardi, oconnor, wathan, mayhew and lander) from src/lib/everyday/body.ts, the maths behind the One-rep max calculator.

Where the inputs come from: the 80 % load and “about 10 reps” are from the paper. The 60 kg lifter is our own made-up example, not a participant. Figure 1 is recomputed from the formulas alone; Figure 2 is an illustration. Neither shows the study’s measurements, and we copied none of its tables.

How we test the maths

On every change to fibub, tests/sci.mjs runs tests/sci-tools/one-rep-max.mjs, which checks each formula against arithmetic done by hand:

  • 60 kg for 10 reps must give 80 kg by Epley (60 × (1 + 10/30)) and by Brzycki (60 × 36 / 27).
  • Lombardi must give 60 × 10^0.1 = 75.536 kg, and O’Connor 60 × 1.25 = 75 kg.
  • Wathan must give 80.848, Mayhew 78.560 and Lander 80.442 kg.
  • One rep must return the load itself, Brzycki must refuse 37 reps or more, and Epley turned round must give 60 kg for 10 reps from an 80 kg max.

tests/everyday.mjs also pins Epley (116.667) and Brzycki (112.5) for 100 kg × 5.

Check it yourself

On the one-rep max calculator:

  1. Type 60 in Weight lifted and leave the unit on kg.
  2. Type 10 in Reps done (to near failure).
  3. Set Round the table to to No rounding (0.1).
  4. Under All formulas it lists Epley 80.0, Brzycki 80.0, Lombardi 75.5, O’Connor 75.0, Wathan 80.8, Mayhew 78.6 and Lander 80.4 kg.
  5. Change the reps to 3 and watch the formulas close up; change them to 15 and watch them spread.
  6. Under What can I lift for a number of reps?, type 10 in Reps wanted to see about 60 kg: the tool takes the average of Epley and Brzycki (80 kg) and turns Epley round.

What researchers can use it for

  • Compare formulas at a glance for a given load and rep count before choosing one for a study or a team.
  • See where formulas part ways: plan test sets with few reps (3 to 5) when you need formulas to agree.
  • Check a reported estimate in a paper or a training log by re-running the load and reps through each formula.
  • Teach why a ”% of 1RM” table is only a rule of thumb, and why the reps people manage at 80 % differ between lifts and between people.
  • Set training loads: use the reps table to turn an estimated max into working weights.

The fine print

  • The study tested young, untrained adults; trained lifters, older adults and other lifts may suit different formulas.
  • “Matched” in the paper means no statistically significant difference on average; any one person’s estimate can still be several kilograms out.
  • Three of the paper’s formulas (Adams, Brown, Welday) are not in the calculator.
  • Our 125 % line assumes the test set was exactly 80 % of the 1RM; in the study it was 80 % of each person’s measured 1RM, and the reps people managed varied.
  • Lift only with good technique, and test a true max only with a spotter or with a coach.

Sources

  • Ribeiro, A., da Silva, J. A., Nascimento, M., Martinho, D., dos Santos, L., de Salles, B., Mayhew, J. and Cyrino, E. S. (2024), Accuracy of 1RM Prediction Equations Before and After Resistance Training in Three Different Lifts, International Journal of Strength and Conditioning 4(1), doi:10.47206/ijsc.v4i1.327. Licence CC BY 4.0, checked in the article on the journal site, 2026-11-16. Values used here: 62 women and 57 men; 16 weeks of supervised training; test set at 80 % of 1RM to failure, about 10 reps; nine equations (Adams, Brown, Brzycki, Lander, Lombardi, Mayhew, O'Connor, Wathen, Welday).
  • Formulas as used by the One-rep max calculator: Epley (1985), Brzycki (1993), Lombardi (1989), O'Connor et al. (1989), Wathen (1994), Mayhew et al. (1992), Lander (1985).

If you are an author or publisher and want a credit or a passage changed or removed, tell us and we will act quickly.

The tool in this article

Read next