Plant-made silver and copper nanoparticles reduce 4-nitrophenol
Silver and copper nanoparticles made with a plant extract convert 90 and 93.5 % of the pollutant 4-nitrophenol. The paper gives no rate constant, so we work out what its numbers imply with fibub's kinetics and Beer–Lambert tools.
4-Nitrophenol is a toxic by-product of dyes, drugs and pesticides that turns up in industrial waste water. With sodium borohydride (NaBH₄) and a metal catalyst it turns into 4-aminophenol, which is far less harmful and useful in its own right. The reaction is also the standard test bench for new nanoparticle catalysts, because its yellow colour fades as it goes and is easy to follow with a spectrometer. A 2026 study in Frontiers in Materials makes silver and copper nanoparticles with a plant extract and a microwave oven, and tests them on this reaction. This article shows how the reaction kinetics fitter and the Beer–Lambert calculator help a researcher plan such a test and turn conversions into the rate constants that let catalysts be compared.
The paper in brief
The team reduced silver nitrate and copper sulfate with a plant extract in a household-style microwave, giving silver particles about 10 nm across and copper particles about 4 nm across (by electron microscopy). In the test, 4-nitrophenol and an excess of NaBH₄ were mixed with 0.5 mg of catalyst, and the yellow band at 400 nm was followed until it faded. Silver converted 90 % of the 4-nitrophenol and copper 93.5 %, copper finishing within 50 minutes, and the copper particles kept about 95 % conversion after five reuses. The paper fits its data with a pseudo-first-order model but does not give a value for the rate constant, the number most papers use to compare catalysts.
Checked with the tools
Step 1: is the starting absorbance in range? From the stated amounts, if everything is mixed in one cuvette (3.4 mL in total, our reading of the method), the 4-nitrophenol is at 88.2 µM. With a molar absorptivity of 18 380 L/(mol·cm), the Beer–Lambert calculator gives a starting absorbance of 1.62 in a 1 cm cell. The tool flags that as high: under 3 % of the light gets through, where stray light starts to bend the line. Halving the 4-nitrophenol would put the start near 0.8, in the most accurate range.
Step 2: is “pseudo-first-order” justified? The method has 10 µmol of NaBH₄ for 0.3 µmol of 4-nitrophenol: 33 times as many molecules, or 44 times what the reaction strictly needs (each 4-nitrophenol takes six electrons; each borohydride gives eight). With that excess, the borohydride hardly changes during the run, so the rate depends on 4-nitrophenol alone and a first-order fit is fair.
Step 3: what rate constant do the numbers imply? For a first-order reaction, a conversion X after time t means k = −ln(1 − X)/t. If copper reached 93.5 % at 50 minutes, k = 0.0547 per minute (9.1 × 10⁻⁴ per second), a half-life of 12.7 minutes. Per milligram of catalyst that is 0.109 per minute per mg. For silver, the paper gives no time, so the k behind its 90 % could be anything from 0.115 per minute (if it took 20 minutes) to 0.026 (if 90 minutes). Figure 2 shows why: the same conversion means a very different catalyst depending on how long it took.
Step 4: fitting a run. We simulated a copper run, readings every 5 minutes with a little scatter, and gave it to the Reaction kinetics fitter (Figure 1). It recovers k = 0.0547 ± 0.0002 per minute, and the Akaike weights (how strongly the data prefer each model) put essentially all the support on first order (R² 0.9999), against 0.92 for zero order and 0.95 for second order. Real runs often start with an induction period, a few minutes before the colour starts to fade; fit only the part after it.
| Check | Paper | Tool result |
|---|---|---|
| 4-Nitrophenol in the cuvette | 300 µL of 1 mM (total volume not stated) | 88.2 µM if 3.4 mL in total |
| Starting absorbance at 400 nm | (not stated) | 1.62: high, dilute if you can |
| Borohydride excess | “excess” | 33 times (44 times what is needed) |
| Copper rate constant | not given | 0.0547 per minute if 93.5 % at 50 min |
| Copper half-life | not given | 12.7 minutes |
| Silver rate constant | not given | 0.026 to 0.115 per minute for 90 to 20 min |
How we made the graphs
Everything above comes from scripts/blog-figures/green-silver-copper-nanoparticles-4-nitrophenol-reduction.mjs in fibub’s public code. It calls:
solveBLandabsQualityfromsrc/lib/sci/beer.ts, the maths behind the Beer–Lambert calculator.conc,fitOrdersandakaikeWeightsfromsrc/lib/sci/kinetics.ts, the maths behind the reaction kinetics fitter.
Where the inputs come from: the amounts, wavelength, conversions and the 50-minute time are from the paper; the molar absorptivity is from Bowers and colleagues (1980). That the 93.5 % was reached at exactly 50 minutes, that all solutions share one 3.4 mL cuvette, and the scatter in Figure 1 are our assumptions. Figure 1 is a simulation, not the paper’s measurements.
How we test the maths
On every change to fibub, tests/sci.mjs checks these functions against known answers:
- Exact zero-, first- and second-order data must give back their rate constants, and the Akaike weights must pick the right order each time; a first-order k of 0.01 must give a half-life of 69.31.
- A simulated N₂O₅ decomposition must return its rate constant of 6.2 × 10⁻⁴ per second, and the textbook methyl isonitrile data must give an activation energy of about 160 kJ/mol.
- The Beer–Lambert maths must turn an absorbance of 0.622 for NADH (ε 6220 L/(mol·cm)) into 0.100 mM, and 10 % transmittance into an absorbance of exactly 1.
Check it yourself
The starting absorbance, on the Beer–Lambert calculator:
- Type 18380 in ε, molar absorptivity (L/(mol·cm)) and 1 in Path length (cm).
- Type 88.2 in Concentration and choose µmol/L; leave the absorbance empty.
- It gives an absorbance of about 1.62, with the note that the value is high and to dilute if you can.
The rate constant, on the reaction kinetics fitter:
- Set Time unit to min, then paste these simulated readings (time in minutes, absorbance at 400 nm, which is proportional to concentration) into Time and concentration, one pair per line:
0 1.6258
5 1.2279
10 0.9438
15 0.7123
20 0.5494
25 0.4085
30 0.3156
35 0.2423
40 0.1781
45 0.1406
50 0.1044
- It reads First order fits best, with k about 0.0547 ± 0.0002 per minute and a half-life of about 12.7 min.
- Switch the plot to ln [A]: the points fall on a straight line, the usual check in catalysis papers.
What researchers can use it for
- Plan the test: check in the Beer–Lambert calculator that the starting absorbance sits below 1 before running the reaction.
- Report a rate constant, not only a conversion: the reaction kinetics fitter gives k with its error and the half-life, so catalysts from different papers can be compared.
- Test the model: the fitter weighs zero, first and second order against each other, which shows whether “pseudo-first-order” really fits.
- Compare catalysts fairly: divide k by the catalyst mass (or surface area) used.
- Find the activation energy: run the reaction at three or four temperatures and use the fitter’s Arrhenius section.
The fine print
- The paper gives no rate constant; every k here is worked out from the stated conversions and our assumed times, not taken from the paper.
- The total volume in the cuvette is our reading of the method; a different volume changes the starting absorbance in proportion.
- Absorbance at 400 nm also includes a little light scattered by the particles; a blank with catalyst but no 4-nitrophenol corrects it.
- Copper nanoparticles can oxidise in air, which may change their activity over time.
Sources
- Joseph Ignacy, J. B., Sinnappan, S. J. X., Ganesan, S., Pal, A., S., S. et al. (2026), Eco-friendly synthesis of nanosized Ag and Cu for the catalytic disintegration of 4-nitrophenol, Frontiers in Materials 13, 1741476, doi:10.3389/fmats.2026.1741476. Licence CC BY, checked on the journal page, 2026-11-16. Values used here: 1 mM 4-nitrophenol (300 µL) in 2 mL water, 0.1 M NaBH4 (100 µL), 0.5 mg catalyst in 1 mL water; monitored at 400 nm; conversion 90 % (silver) and 93.5 % (copper); copper finished within 50 min; pseudo-first-order model; particle sizes 9.8 nm (silver) and 3.6 nm (copper) by TEM; five reuse cycles.
- Molar absorptivity of 4-nitrophenolate, 18 380 L/(mol·cm) near 400 nm: Bowers, G. N. Jr. et al. (1980), High-purity 4-nitrophenol: purification, characterization, and specifications for use as a spectrophotometric reference material, Clinical Chemistry 26, 724-729.
If you are an author or publisher and want a credit or a passage changed or removed, tell us and we will act quickly.